Got_All_4
Luke Skywalker
Offline
On my way to 6-pack trials a couple of weeks ago my wipers quit working. Of course in the rain! I've narrowed it down to the switch. I see that it is serviceable so I took it apart, cleaned and put dielectric grease back into the switch. Still does not work. I can jump the terminals on the back and the wipers work. There are 4 spades on the back of the switch. Any suggestions? Also this is a recent completed restoration and I had to guess where the 3 wires from the motor go. All the markings (color) on the wires are worn off. One wire looks like light brown. The other 2 are tan. Maybe one with a hint and a small hint of red. Power to the motor comes from the solid green wire from the harness. If I can figure out which of the 3 wires goes to the green one, the others should be a piece of cake. Any help here? Thanks.