• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

The Project: A "before" shot of the car.

Share this page

Front valence was so beat up and full of "mud" (someone apparently used at least a QUART of bondo!) it weighed a ton. Solution was to grind off all filler, hammer it back into close to smooth, acid etched front and back, fiberglassed the missing bits where it met the body, used "PanelBond" epoxy to glue a contoured 1/4" steel rod to the bottom edge for rigidity. Primered with epoxy, filled the few "rumples" left and shot it with top coat. Looks brand new now /ubbthreads/images/graemlins/smile.gif
 
Back
Top