• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

The Project: A "before" shot of the car.

Share this page

Front valence was so beat up and full of "mud" (someone apparently used at least a QUART of bondo!) it weighed a ton. Solution was to grind off all filler, hammer it back into close to smooth, acid etched front and back, fiberglassed the missing bits where it met the body, used "PanelBond" epoxy to glue a contoured 1/4" steel rod to the bottom edge for rigidity. Primered with epoxy, filled the few "rumples" left and shot it with top coat. Looks brand new now /ubbthreads/images/graemlins/smile.gif
 
Back
Top