• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

The Project: A "before" shot of the car.

Share this page

Front valence was so beat up and full of "mud" (someone apparently used at least a QUART of bondo!) it weighed a ton. Solution was to grind off all filler, hammer it back into close to smooth, acid etched front and back, fiberglassed the missing bits where it met the body, used "PanelBond" epoxy to glue a contoured 1/4" steel rod to the bottom edge for rigidity. Primered with epoxy, filled the few "rumples" left and shot it with top coat. Looks brand new now /ubbthreads/images/graemlins/smile.gif
 
Back
Top