• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Spongy brakes and annoying hood prop

Share this page

Steve_S said:
Are your plug wires shielded? Plugs also?
Click to expand...

How do you mean, Steve? They are new plugs and wires, but nothing special. Do you mean shielded like coax cable, with an outer braid that is shielding the pulse signal from the inner wire?
 
If they are new, they are probably shielded. Old wires, which you can still get if you ask for them, produced a lot of RF interference. I have a set in one of my cars. I feel sorry for anyone I'm driving near on the freeway! /bcforum/images/%%GRAEMLIN_URL%%/laugh.gif They should say shielded on the side but not always.

I've seen some plugs freak out tachometers too. Champion plugs have an R when they are radio suppressed. For example, the two plugs I use on my Y-Type are N5 and RN5. Same plug, one is shielded and one isn't.
 
Nicely engineer'd, Julian. Sorry to hear of the dancing dwell device. There's so much raw RF under-hood on these old lumps it's likely they leave a wide 'footprint'... kinda like a Marimba band in a McDonald's restroom.

Can you return it? Mebbe hunt up an analog one on e-bay?
 
DrEntropy said:
Nicely engineer'd, Julian. Sorry to hear of the dancing dwell device. There's so much raw RF under-hood on these old lumps it's likely they leave a wide 'footprint'... kinda like a Marimba band in a McDonald's restroom.

Can you return it? Mebbe hunt up an analog one on e-bay?
Click to expand...

Hi Doc. It is an analog one ...

a901_1.JPG


Make is Beldon. The instructions are a little confusing, as they are written for the whole series of their meters. This meter has red/black wires for the battery connection, a blue clip wire, and an inductive pickup. It's not clear to me if I can use the blue clip wire instead of the inductive pickup, which would probably help if I could.

The meter also measures Volts and Ohms and RPM ... the RPM measurement was way all over the place, too, so it's definitely a problem related to the signal pickup.
 
Ah. Belden.

Red (+V) wire to the dizzy-to-coil lead, black (-V) to ground; 4-cyl, and dwell selections should get you a reading. If it's bouncing, you may have a points issue.
 
You know, now that you brought it up I use to have a dwell meter, wonder where it is hideing? Going to have a search party tomorrow. Had forgotten all about that.
 
jlaird said:
You know, now that you brought it up I use to have a dwell meter, wonder where it is hideing? Going to have a search party tomorrow. Had forgotten all about that.
Click to expand...

If you can't find it, you can have mine :-)
 
Ha, stuff was just moved so much in the AF and in storage for eight years. It is prob around I just have not heard it calling.
 
Back
Top