• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

speedometer cable and housing

Share this page

W

wdp

Senior Member
Offline
I'm about to install a new cable and housing for the speedometer in my 72 BGT. Do I need to lube the cable first or does it come pre-lubed in the new housing?
 
a little lube wouldn't hurt I suppose. The last cable I got from Moss Motors was not lubed.
 
Don't know that I would use a liquid but instead would use graphite.
 
Graphite powder is good, sure. I typically use a very light oil like Tri-Flow because it seems to last a little longer and helps prevent rust on the cable.
 
Wipe it down with a light oil.

Never assume that parts come pre lubed.
 
Ok, graphite powder or a light oil. Thanks for the info everyone.
 
Back
Top