• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

speedometer cable and housing

Share this page

W

wdp

Senior Member
Offline
I'm about to install a new cable and housing for the speedometer in my 72 BGT. Do I need to lube the cable first or does it come pre-lubed in the new housing?
 
a little lube wouldn't hurt I suppose. The last cable I got from Moss Motors was not lubed.
 
Don't know that I would use a liquid but instead would use graphite.
 
Graphite powder is good, sure. I typically use a very light oil like Tri-Flow because it seems to last a little longer and helps prevent rust on the cable.
 
Wipe it down with a light oil.

Never assume that parts come pre lubed.
 
Ok, graphite powder or a light oil. Thanks for the info everyone.
 
Back
Top