TR2/3/3A Sending out SU's for throttle shaft rebushing........

[karls59tr]

what is the ballpark cost to have the throttle shafts rebushed or oversize shaft installed?

 

[sp53]

Karl--- steveg suggest Tom Bryant did work and I believe Tom Bryant posted a couple posts on the thread SU running rich; the thread I posted and you were there too - these guys know plenty, I can tell by the way they communicate Plus it looks like Tom Bryant re-bushes Carbs. I would definably look into that!

steve

 

[steveg]

what is the ballpark cost to have the throttle shafts rebushed or oversize shaft installed?

Executive summary: $140.00 for rebush - he uses standard shaft, will re-use yours if specs are OK.

For details, see this, item 2:

https://thosbryant.wordpress.com/faqs/

 

[mctriumph]

Why would you do this when there is a great DIY fix. The wear on the shafts can be repaired
with metal bonding epoxy and sanded back to proper fit. With synthetic grease lasts for decades
MD

 

[karls59tr]

Why would you do this when there is a great DIY fix. The wear on the shafts can be repaired
with metal bonding epoxy and sanded back to proper fit. With synthetic grease lasts for decades
MD

Sounds good.Where can I find out more about that process? How could you sand the shaft to a consistent roundness?