Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Jim_Gruber
Yoda
Offline
Was having issues with shoulder belt locking up and not coming out due to angle it was mounted at. Bracket behind seat had twisted so that it wasn't quite level and I had to put Bugsy in a nose up attitude on an incline in order to get the seat belt lock to release so I could pull out.
So to make a long story short, I unbolted the retractor to tighten the right angle mounting bracket and the retractor has eaten the majority of my belt and doesn't want to give it back. Varying angles doesn't seem to help. Any solutions.
There is some sort of adjustment wheel with a big arrow on it says align arrow with arrow on side of retractor. What is the purpose of this adjustment wheel? And other than tossing the whole thing out and getting another set of belts got a solution.Since 99% of the time I am the only driver of Bugsy, I just may try to swap passenger belt and see if I can make work at least for this weekend.
So to make a long story short, I unbolted the retractor to tighten the right angle mounting bracket and the retractor has eaten the majority of my belt and doesn't want to give it back. Varying angles doesn't seem to help. Any solutions.
There is some sort of adjustment wheel with a big arrow on it says align arrow with arrow on side of retractor. What is the purpose of this adjustment wheel? And other than tossing the whole thing out and getting another set of belts got a solution.Since 99% of the time I am the only driver of Bugsy, I just may try to swap passenger belt and see if I can make work at least for this weekend.
