• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Removing ignition key/lock switch?

Once the cowl is off, there are a couple "breakaway" bolts you'll need to either drill and use an easy-out to un-do or a Dremel and thin cut-off wheel to slot 'em to allow using a screwdriver for the task.

... and don't forget to disconnect the battery FIRST! :wink:
 
I always used an old screwdriver or a small chisel to unscrew those. Catch it on the outter edge as well a s you can and tap to unscrew. The driver or chisel will dig in and turn the screw. Best to give it a wack straigh on to give you a grove to start in first. That way it won't try to slide off when you hit.
 
Back
Top