-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A Mystery TR Part
- Thread starter karls59tr
- Start date
Share this page
charleyf
Luke Skywalker
Online
I would add that the only one I have seen was on a TR4--(I believe) A.
Charley
OK. Guess it would not fit well on a TR3. The exhaust pipe banging inside the cruciform is driving me nuts so I ordered the stock TR3 hold down bracket from Moss.
charleyf
Luke Skywalker
Online
It is a real PITA to install. But it does work. Actually if the mystery part does come off of a TR4 you may be able to use it. But you only have part of it. I believe there is also a hanger that is suspended below the part that you do have.OK. Guess it would not fit well on a TR3. The exhaust pipe banging inside the cruciform is driving me nuts so I ordered the stock TR3 hold down bracket from Moss.
Charley
Is that an overdrive its bolted to? Not readily adapted to a non OD gearbox by the look of it?
Online
this is the bracket on my ā59 TR3a with an early tr6 Atype od gearbox
but I think the rear mounts are in the same place whether its OD or not.
the exhaust is a big bore system so I have wrapped it here and through the cruciform to prevent knocks and vibration.