Re: "Might as well" if you need to pull the TR6 da
Td-
You should not have to remove the dash to install
new turn signal wires. The harness cover has a
bit of wiggle to it if it is not filled with old wires.
Make sure all the old TS wires are out. You access
the other end of the harness cover from driver's footwell.
Yes, an awkward position but brief time spent there.
It is a tight fit but the new wires will fit in the opening
you have without taking out the dash. I did mine with
oversized wires and I'm really lame when it comes to such
things. You can do this thing. Here's how it should look.
Turns, driving lights and horn wires all go thru the cover.
PS: My advice on your dash. Unless you have a problem of some kind; leave the dash alone. A real pandora's box once you remove it. Dale