TR2/3/3A Leaking O.D. section of Transmission

[DavidApp]

You must be trying to remove the pin in the lever on the passenger side of the gearbox. I did not remove that side lever only the plate on the drivers side.
The pin is probable a taper pin so you have to drive it out from the small end. They make Pin punches for that purpose.
Be careful to not bend the shaft.

David

 

[Redoakboo]

Sorry I didn't complete the original posting, I meant to delete it and couldn't.
A nail set or hardened punch may be a better weapon to remove the pin. I don't think it is tapered, so it should be possible to remove it from either side after removing any peening.
Berry

Thanks Berry,
I will visit Lowes and see if i can find a harden punch.

Dick

 

[DavidApp]

You are looking for something like this. One of the punches should be small enough to remove the pin.

David

https://www.lowes.com/pd/IRWIN-4-5-in-Pin-Punch-Set/1003172404

 

[Redoakboo]

You are looking for something like this. One of the punches should be small enough to remove the pin.

David

https://www.lowes.com/pd/IRWIN-4-5-in-Pin-Punch-Set/1003172404

Thanks David,
Will stop by Lowes and get one today. Dick