Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Tim Tucker
Jedi Trainee
Offline
TR-4 owner here with 195/60-16's on Konig Rewind 16x7 wheels (0 offset). I didn't require a spacer. But it is tight at steering lock.
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR6 Konig 15X7 wheels on TR6 - No mod fit?
- Thread starter Brosky
- Start date
Share this page
Offline
I am still here and still have my TR250. As far as the wheels, with the Konig 15 x 7" I got a little rub at full lock going backwards, even with a little grinding on the upper suspension member. I added spacer 1/4" maybe 1/8" (don't remember), no problem now.
Tires I have used 205/65s, and currently 205/60s. I have a new set of 195/65s I haven't fit yet. Never any problem with tires hitting anything. Won the club autocross championship with the 205/60s last year. My car is on stock springs with the pans lowered in front and the rears lowered through the rear suspension settings and some sag in the original stock springs I think. Lowered about an inch between lower profile tires and suspension.
Tires I have used 205/65s, and currently 205/60s. I have a new set of 195/65s I haven't fit yet. Never any problem with tires hitting anything. Won the club autocross championship with the 205/60s last year. My car is on stock springs with the pans lowered in front and the rears lowered through the rear suspension settings and some sag in the original stock springs I think. Lowered about an inch between lower profile tires and suspension.