• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Illuminating gauges with Electroluminescent tape

Share this page

Pix!

MKIII-style fuel gauge without windows.
Smiths_fuel_gauge_02_zpsd0e827ff.jpg


The area where the tape will have to go.
Smiths_fuel_gauge_03_zpsca0a4d33.jpg


The spatial situation.
Smiths_fuel_gauge_04_zps4493ed00.jpg


The unsuccessful CV2-1148 test.
Smiths_fuel_gauge_05_zps258651be.jpg


Alligator clips work but are kinda bulky.
Smiths_fuel_gauge_06_zps47b9561e.jpg
 

Attachments

  • Smiths_fuel_gauge_06_zps47b9561e.jpg
    Smiths_fuel_gauge_06_zps47b9561e.jpg
    52.8 KB · Views: 94
Hi Tom,

Maybe now you can appreciate why I gave up and just bought four tapes with leads already attached and just cut each to fit. At $8 per tape + inverter, it's almost less expensive too. :)

Best of luck!

Dan
 
owensdad74 said:
Do you have to remove the gauges from the car, or can they be done in situ?
Click to expand...

You'd definitely need to remove the gauges. Otherwise, I don't know how you would drill the required hole in the speedometer and tachometer housings, or remove the blue plastic ring in the fuel and combination gauges.

Dan
 
Back
Top