• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Gear Shift Lever

Share this page

6

65_BRG_Sprite

Jedi Warrior
Country flag
Offline
The bottom of the gear shift lever has a slot let in near the bottom. What does this slot engage, if anything, and which direction does it face?
My bad- I took it out w/o making notes.
Thanks in advance.
 
If you are talking about the groove that goes around the ball at the bottom of the lever it has a rubber O ring in it to take out rattle.

Kurt.
 
The receiver for the shift lever has (or should have) a dowel that goes in that slot. If the dowel is in there you don't have any choice but to put the shift lever in correctly. Try inserting it and see if you don't see the dowel.
BillM
 
Back
Top