• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Gear Shift Lever

Share this page

6

65_BRG_Sprite

Jedi Warrior
Country flag
Offline
The bottom of the gear shift lever has a slot let in near the bottom. What does this slot engage, if anything, and which direction does it face?
My bad- I took it out w/o making notes.
Thanks in advance.
 
If you are talking about the groove that goes around the ball at the bottom of the lever it has a rubber O ring in it to take out rattle.

Kurt.
 
The receiver for the shift lever has (or should have) a dowel that goes in that slot. If the dowel is in there you don't have any choice but to put the shift lever in correctly. Try inserting it and see if you don't see the dowel.
BillM
 
Back
Top