• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Fixing Twisted Sway Bar Bracket

steveg

Yoda
Gold
Country flag
Offline
Sway bar bracket twists because top tab does not rest against side of lower A-arm. This add-on should prevent the twisting. New bracket temporarily installed on the A-arm and gaps measured at 9/32" and 5/16". Tabs on add-on were fitted to these gaps. Was made from a house-framing bracket of approximately the same gauge steel.

screenshot.2412.jpg
screenshot.2413.jpg
screenshot.2414.jpg


screenshot.2416.jpg
screenshot.2417.jpg
 
Last edited:
Looks good Steve. Were your mounts missing the spacers that go between the bottom of the A arm and the bracket?

Cheers,
Tush
 
Back
Top