• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Fixing Twisted Sway Bar Bracket

Share this page

steveg

steveg

Yoda
Gold
Country flag
Offline
Sway bar bracket twists because top tab does not rest against side of lower A-arm. This add-on should prevent the twisting. New bracket temporarily installed on the A-arm and gaps measured at 9/32" and 5/16". Tabs on add-on were fitted to these gaps. Was made from a house-framing bracket of approximately the same gauge steel.

screenshot.2412.jpg
screenshot.2413.jpg
screenshot.2414.jpg


screenshot.2416.jpg
screenshot.2417.jpg
 
Last edited:
Looks good Steve. Were your mounts missing the spacers that go between the bottom of the A arm and the bracket?

Cheers,
Tush
 
Back
Top