• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB external alternator regulator

Share this page

E

emmett1010

Jedi Hopeful
Country flag
Offline
installed a new wiring harness for 1968 mgb. This harness is wired for a 5 wire alternator with an external regulator.
I'm wanting to install the later 3 wire alternator with internal regulator. I will buy the adaptor to convert the 5 wire setup to the 3 wire setup, no problem, but what should i do withe the external regulator.
leave it plugged in
leave it unplugged
change some/any of the wiring?
 
emmett1010 said:
installed a new wiring harness for 1968 mgb. This harness is wired for a 5 wire alternator with an external regulator.
I'm wanting to install the later 3 wire alternator with internal regulator. I will buy the adaptor to convert the 5 wire setup to the 3 wire setup, no problem, but what should i do withe the external regulator.
leave it plugged in
leave it unplugged
change some/any of the wiring?
Click to expand...
If you're getting the three wire adaptor, get the faux regulator and follow the included instructions on wiring connections. It is internally set up to be used with an alternator that is internally regulated...
 
Back
Top