• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Distributor diagnostics?

  • Thread starter Thread starter Tinster
  • Start date Start date

Share this page

The slotted tab with the screw holding the condenser to the movable breaker plate needs to be moved slightly towards the center of the distributor to prevent the tab from rubbing on the inside of the distributor housing and perhaps limiting breaker plate travel if the vacuum advance is used.
 
Dale, mine was just an observation. Follow the others advice about the proximity and get three hours of drive time tomorrow! Still working on that parade and waiting a return call from Oprah! :wink:
 
Back
Top