Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
OP
TRDejaVu
Guest
Guest
Offline
or Suck, Squeeze, Bang, Blow as I learnt it.
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Share this page
startech47
Jedi Knight
Offline
The slotted tab with the screw holding the condenser to the movable breaker plate needs to be moved slightly towards the center of the distributor to prevent the tab from rubbing on the inside of the distributor housing and perhaps limiting breaker plate travel if the vacuum advance is used.
Silverghost
Yoda
Offline
Dale, mine was just an observation. Follow the others advice about the proximity and get three hours of drive time tomorrow! Still working on that parade and waiting a return call from Oprah! :wink: