• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Connecting Rod Big End Specification

Share this page

R

rcull

Freshman Member
Offline
I believe I have a '62 Healey BJ7, block casting number AEC881.

I need the big end specification for the connecting rods, casting number AEC790S

Thanks,

(PS for the webmaster, that stupid little man hasn't disappeared in the last two weeks! Probably because I have to use an older computer)
 
I can’t offer any help regarding the Healey info but I think the “little man” will vanish now that you made your first post. Welcome to the British Car Forum.
I’m sure another member of the Healey section will be along to offer you some help.
 
From the official manual pp 19 - 20:

screenshot.2111.jpg


screenshot.2112.jpg


Brooklands currently publishes cheaper version, 344 pgs:

screenshot.2110.jpg


Official British Leyland, 416 pgs (same as previous Bentley publication):

screenshot.2113.jpg
 
Thanks,
I didn't find a number that seemed correct in the manual, but I found the rod big end dimension. It is 2.1140-2.1145" (53.696-53.708 MM)
 
Back
Top