• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4/4A Close up pics of your TR4a fuel lines

tdskip

Yoda
Country flag
Offline
Hi guys - picking at the TR4a IRS again and need some help on the fuel lines. Specifically, I am looking for correct routing of the fuel lines into the pump and then from the pump to the carbs.

Thanks!
 
I think these are correct, though not original. The tube between the carbs should be clamped to the air cleaner bolts, and ignore the loop in the vacuum line.
 

Attachments

  • 24805.jpg
    24805.jpg
    58.1 KB · Views: 359
  • 24806.jpg
    24806.jpg
    53.9 KB · Views: 336
  • 24807.jpg
    24807.jpg
    67.2 KB · Views: 343
Thanks guys - very much appreciated.

She has SUs, so the end point is a bit different but not much. It looks like there is a single metal fuel line that makes the run from the pump to the bowls. I don't have that section so I'll have to fabricate one.

Nice cars guys!
 
Tom,

dcp_1773.jpg


As Darrell said the carb to carb section should clamp to the air filter bolts, but I routed mine underneath similar to Jim's pictures as I used Weiand air filters instead of the paper elements.

Scott
 
Back
Top