• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR4/4A Close up pics of your TR4a fuel lines

tdskip

Yoda
Country flag
Offline
Hi guys - picking at the TR4a IRS again and need some help on the fuel lines. Specifically, I am looking for correct routing of the fuel lines into the pump and then from the pump to the carbs.

Thanks!
 
I think these are correct, though not original. The tube between the carbs should be clamped to the air cleaner bolts, and ignore the loop in the vacuum line.
 

Attachments

  • 24805.jpg
    24805.jpg
    58.1 KB · Views: 372
  • 24806.jpg
    24806.jpg
    53.9 KB · Views: 352
  • 24807.jpg
    24807.jpg
    67.2 KB · Views: 359
Thanks guys - very much appreciated.

She has SUs, so the end point is a bit different but not much. It looks like there is a single metal fuel line that makes the run from the pump to the bowls. I don't have that section so I'll have to fabricate one.

Nice cars guys!
 
Tom,

dcp_1773.jpg


As Darrell said the carb to carb section should clamp to the air filter bolts, but I routed mine underneath similar to Jim's pictures as I used Weiand air filters instead of the paper elements.

Scott
 
Back
Top