-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Chris and Jeff
- Thread starter jlaird
- Start date
Share this page
Offline
How different is the receiving end? I thought the bore was sufficiently "deep" to accomodate either one. The ends are the same diameter, the 1/4" difference would only engage the receiver at a different point in the bore.
Only thing I can think to worry over would be the short stem coming out of the rib-case receiver on full travel if engaging reverse, methinks.
Now I wish I had examples of both here to play with! /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
Only thing I can think to worry over would be the short stem coming out of the rib-case receiver on full travel if engaging reverse, methinks.
Now I wish I had examples of both here to play with! /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
OP
jlaird
Great Pumpkin
Offline
The weather is getting cooler here, down to mid 80's now. Soon it will be agreable to work in the garage then I won't spend so much time here.
Oh yea, took me three months to master Yamaha engines, Legend Race Cars.
Thing ran like a you know what this week end. Lots of power, hooked up excellent, and bumped the rev limiter at 10.5 at the end of every straight. I did my job, now if I can just get Ted to push some. Oh yea, thought we had a drag racer comming off the corners. Scared the heck out of me on the first hot lap.
Oh yea, took me three months to master Yamaha engines, Legend Race Cars.
Thing ran like a you know what this week end. Lots of power, hooked up excellent, and bumped the rev limiter at 10.5 at the end of every straight. I did my job, now if I can just get Ted to push some. Oh yea, thought we had a drag racer comming off the corners. Scared the heck out of me on the first hot lap.