TR6 Bolt size/thread count for fuel sender TR4/TR6

[tdskip]

Well so much for the idea that I was diligent on packing and labeling everything.

Anyone know off hand the thread size/count for the thread that are used to secure the fuel sender to the tank by chance?

Moss #323-370 or #28 in the schematic below.

Thanks!

 

[DNK]

I have em out in the garage in a bag if you need em!

 

[tdskip]

8/32 Don?

 

[DNK]

Now your gonna make me go down there.

 

[TR3driver]

Stanpart TR6504, which is 10-32 by 1/2" long.

 

[DNK]

10/32's X 3/8s oval head straight tip.
Copper washer?

 

[tdskip]

Ah - thanks guys!

 

[tdskip]

Man is it ever nice to be putting something back together for a change. The 10/32 worked a treat guys - thanks again!

 

[Gliderman8]

Yep... I concure... 10/32's is it!

 

[DNK]

Don't forget them fiber washers

 

[tdskip]

Don't forget them fiber washers

The single big one that goes under the top of the sending unit?

 

[DNK]

no, each of them little screws has a fiber washer

 

[TR3driver]

no, each of them little screws has a fiber washer

Only fiber washers on mine are where the bolt/stud for the wire passes through the plate. The bolts that hold the sender to the tank only have internal star lock washers (P/N WN0705) per the SPC.

 

[DNK]

all of mine has a small which I thought copper washer. The diagram Tom posted list a fiber washer

 

[TR3driver]

In the immortal words of Emily Litella:

 

[TR3driver]

Apparently TR4-6 did have fiber washers, TR2-3 had lock washers.

My bad.

 

[tdskip]

Thanks guys - I missed the second washers on top.

Ace or someone similar have something that will work you think?