Having fitted refurbished standard carbs to my BN7's rebuilt engine, and set timing, and confirming fuel to the carbs, I've failed to get the engine to run.
Its dawned on me that I've assumed the "new" carbs are set up!
I would like to "base-line" the carb settings to get the engine running. Any advice on the correct sequence for establishing the basic carb setting would be much appreciated.
(Twin HD6's fitted)
thanks
Dace
Its dawned on me that I've assumed the "new" carbs are set up!
I would like to "base-line" the carb settings to get the engine running. Any advice on the correct sequence for establishing the basic carb setting would be much appreciated.
(Twin HD6's fitted)
thanks
Dace