-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A back half to chassis questions
- Thread starter Frank Canale
- Start date
Share this page
OP
Offline
Not the best pictures but the over rider brackets have been sorted out and the notches have been cut now. The distance at the top from the valance to the over rider is 2 inches on both sides. both sides seem to look the same. the brackets bolt up with out having to force anything into place.
CJD
Yoda
Offline
That is smart checking the bumperette fits before the final paint. I usually cut off the extra length of bolt that points toward the hard-earned bodywork! You bolts are not so bad, but many reach way to close to the paint.
Graham, I love the look of the vintage Washington plates. It contrasts with your car color very well.
Graham, I love the look of the vintage Washington plates. It contrasts with your car color very well.