-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A Applying the Permatex copper gasket spray to the head gasket?
- Thread starter karls59tr
- Start date
Share this page
Offline
I think I let it cure before installing; maybe 30 minutes. To make sure (1) it does not drip into places it's not supposed to be, and (2) I assumed it needs some thickness to seal, and I applied a few (light) coats. It should "ooze", not run.
The Permatex web page says you can pre-coat, so you can't go wrong with letting it dry. At the same time, the instructions do not include a requirement to let it dry... bottom line it probably doesn't matter.
The Permatex web page says you can pre-coat, so you can't go wrong with letting it dry. At the same time, the instructions do not include a requirement to let it dry... bottom line it probably doesn't matter.
