-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A Applying the Permatex copper gasket spray to the head gasket?
- Thread starter karls59tr
- Start date
Share this page
Offline
I think I let it cure before installing; maybe 30 minutes. To make sure (1) it does not drip into places it's not supposed to be, and (2) I assumed it needs some thickness to seal, and I applied a few (light) coats. It should "ooze", not run.
The Permatex web page says you can pre-coat, so you can't go wrong with letting it dry. At the same time, the instructions do not include a requirement to let it dry... bottom line it probably doesn't matter.
The Permatex web page says you can pre-coat, so you can't go wrong with letting it dry. At the same time, the instructions do not include a requirement to let it dry... bottom line it probably doesn't matter.
