Offline
I've been working on this '65 and have had lots of electrical problems. The latest is that something went haywire, the ignition light never went out and when I popped the hood to see what was up, the genny wires were smoking. One, bad generator and regulator later and I'd really like to add a switch to thie guys car.
I have one in my roadster and it is mounted through the vertical panel right in front of the battery box. It's the one with the large red key.
Anyway, this '65 is far too nice to do the same thing to so it got me thinking. I'd like to fill the hole where an OD switch is supposed to be but I doubt that switch can handle that much load. Can I add a relay at the battery then run smaller wires to the OD switch? If so, how do I determine what size relay to use?
Cheers
Vince
I have one in my roadster and it is mounted through the vertical panel right in front of the battery box. It's the one with the large red key.
Anyway, this '65 is far too nice to do the same thing to so it got me thinking. I'd like to fill the hole where an OD switch is supposed to be but I doubt that switch can handle that much load. Can I add a relay at the battery then run smaller wires to the OD switch? If so, how do I determine what size relay to use?
Cheers
Vince