• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 1973 tr6 oil pressure light

Share this page

sundown

sundown

Jedi Hopeful
Offline
Pretty much have the wiring figured out although the hazard switch will only work with ignition switch on and the oil warning lamp stays on?
 
If wired correctly the OP light will never be illuminated by itself. The OP light is always accompanied by an illuminated "BRAKE" light.
However a problem with the brakes that would cause the "BRAKE" light to illuminate will NOT also illuminate the OP light.

No comment on the hazard light except to say that's not right either.
 
The brake light is also on with the oil pressure light but they do not turn off once the car is started
 
I guess there are a couple of things that could account for that, but my first stop would be at the switch, making sure that the White/brown wire was on terminal "S" and not on terminal "P"
 
Back
Top