• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

transmission

  1. T

    For Sale Excellent Original 1968 TR250 Frame with Engine & Transmission

    Excellent frame from a 1968 TR250. I did an all out restoration on the car and put in a new RATCO frame. I would highly recommend using this frame over repair or replacing with a RATCO frame. $2500 with very good engine and transmission.
  2. T

    For Sale MGB Black Label Overdrive For Sale Or Trade For New RB Parts

    I purchased this unit intending to put it in my 68 GT. I’ve since decided to go another route with a possible V6/V8 conversion. Sold as is. Local pick up in Statesville, NC 28625 preferred but may be able to help with UPS shipping. Possible partial trade for new 77-80 RB parts (i.e. interior...
  3. TR6Canuck

    For Sale 72 TR6 clutch and transmission

    I decided to replace my 72 TR6 4-speed transmission with the Miata 5-speed. The TR6 clutch and transmission worked flawlessly. No mechanical issues with it, I just travel longer distances in my car and needed the five speed for highway use. Located in Collingwood Ontario, can be brought to...
  4. D

    TR4/4A Automatic transmission in a TR4 A

    I know this is considered blasphemy in our world, but a friend of mine has a TR4 A but due to leg problems can no longer depress the clutch pedal. So I was wondering if the automatic transmission from the Stag could be used in the TR4 A. Also whether anyone out there has done this? Thanks, Dan
  5. DrEntropy

    The Infamous 3-synchro MGB Transmissio

    A Tale of Transmissive Tutelage Submitted by @DrEntropy This story takes place a few decades back, when we could find MG’s largely un-rusted and for affordable amounts of money. To be accurate it was late in 1972. As a Sergeant in the US Air Force and married to my college heart-throb for a...
  6. skystryd

    Idea Time 79 Midget

    Instead of doing any of the 5K or more things I should or need to do... I was watching a car channel program about modifications made to a Morris Minor and the owner was tired of not having easy access to his tranny and diff, so he just cut openings in the right places big enough to do whatever...
  7. skystryd

    Trans and Diff

    Simple tasks no doubt. Except for several answers with each being slightly different. Trans: drain bottom...fill passenger side. visible from engine bay but reachable? 1500's not fillable from the cockpit passenger side under carpet. only from under. square plug...size? Tips? 1500's use...
  8. C

    For Sale TR-6 Drivetrain Parts

    Removed from 1974 (July construct) TR-6 damaged (firewall/scuttle/dash) from engine compartment fire in 2018 due to fuel leak: Engine, Trans, driveshaft, differential, half-shafts, rear drums/shoes, all 4 springs, front rotors, rear lever shocks, etc. Car had 67,946 miles when sidelined...
  9. Sopwith_Camel

    up or down?

    Can I drop just the Transmission out the bottom of a 67 340 (mk2)
  10. G

    BJ8 Transmission Front Seal

    1964 BJ8 leaking front transmission seal. Quick question for you guys. With the transmission out of the car, do you need to remove the bell housing to replace the front seal on the BJ8 Transmission? If you have any additional tips on doing this job they would be appreciated. I was unable to...
  11. S

    MGB early transmission vs od transmission for 3 main engine

    i just purchased an overdrive from an early mg. it does not have a shift lever. moss lists one for the od and one for the regular unit. my mg mechanic says they are interchangeable. anyone have any direct experience with this?
  12. C

    TR4/4A Transmission seals that do?

    I'm thinking about resealing my 4-speed and I've gone down this road before. I have replaced the front and rear seal and they last a while before weeping, but the selector shaft o-ring seals never do well. I have found a few threads that hit this a bit, but I'd like to do it right this time and...
  13. N

    MGB Engine & Transmission / Gearbox

    As part of my 1965 MGB "Resurrection" project I want to have the engine, transmission, and rear end completely cleaned, disassembled, inspected, and rebuilt. The car has 54,715 original miles on, I was told when I bought the car many years ago that the transmission had a recent rebuild. The car...
  14. T

    TR4/4A Replacing Drive Train Seals

    We're continuing our rejuvenation efforts on the 1966 TR4A. Overall it is in decent shape for a 50 year old car with 70,000+ miles. I am debating (or arguing) with myself if I should replace some key seals in the drivetrain. Specifically I am looking at the transmission input shaft and output...
  15. S

    TR4/4A problem with overdrive

    tr3 with a tr4 trans with od. the od pops in, but doesn't let go. even if i power off the car, the solenoid does not release. if i remove and replace the solenoid, it again pops in but not out. i have another tr4, where the od works fine. i notice on this car that there is some sort of...
  16. S

    TR2/3/3A Transmission not going in

    this car has been undergoing restoration for years. finally got it running and driving a few months ago, and ran into numerous problems. note: i had mistakenly paid somebody to do most of the work, and he decided he didn't want to finish it. most likely, he did such a lousy job he didn't...
  17. C

    100-6 Mainshaft Replacement [1959]

    Hi, I just rebuilt the overdrive that wasn't on my car and found a OD type tranny main shaft. I just pulled the tranny and am ready to disassemble and switch main shafts. Any good instructions for swapping out the main shaft with minimal disassembly? I have rebuilt engines but never a...
  18. R

    Bugeye transmission sticks in neutral

    Hi, At a long traffic light I sometimes put the car in neutral and let the clutch out to relax. Sometimes (maybe 25% of time) I can not get it into first. I have to give it a real yank into second then it slides into first ok. Could it be clutch? Have not bled clutch lines lately, seems...
  19. T

    TR2/3/3A Overdrive and Grearbox Shops in Florida and South Virginia

    Would appreciate any recommendations for good repair shops in Florida or southern Virginia for Brit car transmissions, including Laycock overdrive additions/replacements/repairs. Regards, Walter
  20. 69MGC

    MGB What parts are in most demand?

    I ran into a gent from the UK this week who buys parts here in the US and ships them back to the UK for sale. Mostly he buys the metal parts of MGs (doors, trunk lids, metal dashes, etc.). He ships a container full of these parts once or twice a year. He states that these parts are in high...
Top