Chris,
How is the project going? Waiting for more news.
Hi Doc,
Has been quite cold down in Victoria and windy but have been pushing on, from the photos it has been mainly the dash
but this has led to more things to be resolved. With the dash finally out panel beated a bit and finally painted they way I wanted decided to re paint dash pad and fender as well.
This then led me to the heater once refurbished I then had to deal with the surface rust in the air intake plus while having the choke cable off did the air intakes for the carbys. The first pic shows gauges just sitting in their positions , replaced internal instrument lights with leds but was not sure if I should replace the ignition one with led I did read somewhere it is better to use the filament globe ? Also should I on the oil and water temp gauge use anything to seal the nut for the oil line coming to the gauge ? The chrome strip on the glove box has been missing for a month, my wife told me I must have thrown it out but like many times before I found it when looking for something which had nothing to do with the B. With the heater box as you said stuck the rubber block to the box and the other seals to the firewall , it took quite a bit of manoeuvring but got it.The gauges I have not decided what to do with the gauges but putting in the temp gauge the bezel released and the calking compound is
like dust so I was going to use Permatex form A sealing gasket sealant about $12 Aussie what would you recommend ?
Thats about it for now as it is nearly midnight better get some shut eye
Regards
Aussie Chris