Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
Agree. After all, the Healeys are "Performance Art".
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
AH 3000 rear disc brake conversion
- Thread starter Asuny64BJ8
- Start date
Share this page
Agree. After all, the Healeys are "Performance Art".
Offline
BOFFO! (Couldn't resist.)
It's remarkable that Boffo Motors(http://www.boffo-motors.com/) is still in business! My Healey(67 BJ8-Golden Beige) which I purchased new from them and serviced many years by Jim and crew. He was a excellent mechanic and raced Minis on weekends. Curious as to how you chose them?
WD
Offline
That's great - the 100-6 was the only Healey model where 4-wheel disc brakes were offered as an option.
Offline
Steve--
I'm very interested in learning about Richard's method of balancing front/rear braking effort. Please tell me how to get this info.
I already have a Summit flow restrictor valve installed in the line going to the rear drum brakes. It will adjust the flow to the rears from 100% down to 60%, or any place in between.
Am I correct in assuming that it will serve the same purpose as a valve that balances flow between front and rear lines?
I'm very interested in learning about Richard's method of balancing front/rear braking effort. Please tell me how to get this info.
I already have a Summit flow restrictor valve installed in the line going to the rear drum brakes. It will adjust the flow to the rears from 100% down to 60%, or any place in between.
Am I correct in assuming that it will serve the same purpose as a valve that balances flow between front and rear lines?
Offline
Here's the method of adjusting a proportioning valve:
Method was suggested with the car on jackstands:
to have an assistant lightly gradually apply the brakes while you hand-turn a front and back wheel.
Start with 7 turns down (from wide open) on adjuster; adjust to the point where front brakes just locked and rears braking but still moveable.
If your Summit valve looks like this, that's your answer:
Last edited:
HealeyPassion
Jedi Warrior
Offline
FWIW ... regarding the front brakes...I recently bought a Fosseway disc kit which has vented rotors and 4 piston aluminum calipers. This is the first kit I have seen that has vented rotors for Austin Healey's .... there may be another that I'm not aware of but I couldn't find one ... the Fosseway components are beautifully made. The brake experts that I communicated with told me that the "vented rotors" were a huge improvement over solid rotors. These will be going on my current BJ7 project car. 
BoyRacer
Jedi Warrior
Offline
I would like to add something more about dialing in the proportioning valve setting. My jack stand method is only to make the initial setting. The next step is to road test the car and use the brakes hard, multiple times, to make sure the fronts lock up before the rears. I would also like to comment about Steve's brackets to gain additional leverage at the hand brake bell crank and at the same time lessen the length of throw of the handle. Excellent idea. On the other hand, DW's instructions for a rear disc brake conversion describe a method to shorten the arm that the hand brake cable connects to. This will also minimize the throw of the hand brake arm but it requires more force to pull the handle to set the brake.