-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A TR3 radio console
- Thread starter Got_All_4
- Start date
Share this page
OP
Got_All_4
Luke Skywalker
Offline
Thanks Peter for those pics. Does help a lot. Also my cardboard mock up turned out great and I drove around with it last night. I pretty sure I'm going to do it and i sure do like the way yours is made. The rounded edges makes it look better quality. How do I get one from Macy's garage?
Just did a Google search and found their site but the console was not listed in their parts data.
Just did a Google search and found their site but the console was not listed in their parts data.
Last edited:
PeterK
Yoda
Offline
That didn't take long. Not on Macy's, but on the British Wiring site https://www.britishwiring.com/TR3-Radio-Bracket-p/tr3rb.htm
PeterK
Yoda
Offline
I'll go out and check it for you. The SS mesh is from Pegasus Racing https://www.pegasusautoracing.com/group.asp?GroupID=SCREEN
Be right back.
It's the shadows that make the side pieces look rounded. They are flat. The front is the only rounded piece.
The screen was cut to a rectangle then I pressed the screen through 4 dabs of JB Weld on the rear of the front piece. No speaker behind it yet although I have a dual voice coil 5-1/4" that I might try to mount there at some point.
Be right back.
It's the shadows that make the side pieces look rounded. They are flat. The front is the only rounded piece.
The screen was cut to a rectangle then I pressed the screen through 4 dabs of JB Weld on the rear of the front piece. No speaker behind it yet although I have a dual voice coil 5-1/4" that I might try to mount there at some point.
PeterK
Yoda
Offline
Good question. It probably mounts to the side pieces, maybe a front plate for the radio. But ... I'll get back to you on that after I check.
OP
Got_All_4
Luke Skywalker
Offline
Nice! Ordered Friday got it today.
Has anyone installed a modern radio in one of these console? If so how difficult? I was driving around in my TR250 tonight and couldn't find a good station to listen to. They have eliminated all the good oldies stations around here for country, which I can't stand.
Has anyone installed a modern radio in one of these console? If so how difficult? I was driving around in my TR250 tonight and couldn't find a good station to listen to. They have eliminated all the good oldies stations around here for country, which I can't stand.