• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Fess up - who has used fiberglass fenders?

tdskip

Yoda
Country flag
Offline
I'm getting severely tempted here. The front fenders I pulled are probably beyond saving and the fiberglass ones I have seem to fit well....

(let the beatings begin)
 

jackag91

Jedi Warrior
Offline
Mine had them installed when I bought the car. They seemed ok. But they had a few chips in them.

Also the DPO glued, yes glued them on. So the got really torn up when I took them off.

They went in the trash heap.
 

TR6oldtimer

Darth Vader
Offline
I would not buy them, but if I had them, rather then spending another grand for 'new' ones, I would have no problem installing fiber glass fenders. This is assuming they fit well.

Purists will scoff, and you will not get high scores if you intend to show the car. But if your desire is to drive and drive the car, who cares?
 

BryanC

Jedi Hopeful
Offline
You might wonder about resale (unless you'll keep it forever). When looking for my car, I saw one with four fiberglass fenders. It was a fairly nice car with nice paint but I walked away because I didn't want 'glass. To fix it would cost me four fenders AND a new paint job. I saw the car later on eBay. Being an honest guy, the owner stated that it had 'glass fenders in the posting. He posted it three times and never got a bid.

Bryan
 

NutmegCT

Great Pumpkin
Gold
Online
Mine has fiberglas front fenders. Look and fit well. And fortunately are not glued on .... (glued ????!!!! good grief!).

Tom
 

roofman

Jedi Knight
Offline
Mine has all 4 fiberglass fenders and they look and fit great. My car is modified anyway so purists be damned on this one. If I had a car that had all steel fenders and say only 1 needed replaced I would probably go with steel, but mine was that way when I go it and that's ok by me.
 
T

Tinster

Guest
Guest
Offline
For reasons unknown to me, DPO Pedro tore out
Crypty's firewall,installed fiberglass and painted
it red.

d /bcforum/images/%%GRAEMLIN_URL%%/crazyeyes.gif
 

malice

Senior Member
Offline
HAHA Glued. Jesus Christo. I could just imagine that mess. Your DPO sounds much worse than mine. I thought I had it bad with black duct tape.
 
D

DougF

Guest
Guest
Offline
I have four glass fenders that I took off a car, but I've never put any on. I guess I like to watch metal rust.
 

TR674

Jedi Warrior
Offline
I have fibreglass front fenders. I also have the original metal ones in the shed. The fibreglass ones fitted to the car are of very good quality and fit well. I won't be putting the metal ones back on anytime soon.
Regards
Craig
 
OP
T

tdskip

Yoda
Country flag
Offline
Thanks for the input guys.

I was all fired up about getting my fenders fixed, then realized I was in over my head, and then the body work guy indicated that they were really far gone....
 
Similar threads
Thread starter Title Forum Replies Date
roscoe OK, fess up. Austin Healey 49
K TR2/3/3A How to tell if the timing chain has slipped...... Triumph 12
drooartz The great Gordon Murray has a Bugeye! Spridgets 0
R TR6 I just brought this to its new home. It has been stored for 15 years, has only 21000 miles , and only 1000 sincw Triumph 12
B tachometer cable has a hole in it Restoration & Tools 7
K TR2/3/3A Red ignition light stays on...car has alternator not generator. Triumph 17
W Wanted Servo for BN4 has to be original 1957 or before any condition considered. Austin Healey Classifieds 11
AUSMHLY BJ8 Transmission just rebuilt now has metal filings Austin Healey 10
K TR2/3/3A Clutch Slave Cylinder location when TR3 has a TR6 Gearbox? Triumph 16
T TR2/3/3A Has anyone designed a hand brake warning light for the TR3? Triumph 3
R Has this ever happened to you? Any odd Sprite story... Spridgets 8
P Hoping someone has this measurement easily available. Austin Healey 3
E General TR Hertitage certificate: factory record has not survived Triumph 11
R General Tech Preserve eng/trans that has been removed Triumph 11
S TR2/3/3A TR3 has me stumped, it runs then dies over and over and the exhaust system was pulled Triumph 9
T TR6 Car has always started without fail.....until now Triumph 10
C TR6 A lot has happened. Update on my project Triumph 7
Jim_Gruber In need of 2 Fulcrum Pin Bolts - MOSS Has them on Back Order Spridgets 3
K TR2/3/3A Friends TR3 has carb issues? Triumph 5
vette To Johnny who has posted an Article in the Articles Section about his German Exported Austin Healey 9
BOBBYR My Dad has to be laughing Austin Healey 4
doc50 Metro 1500 Has Slack Timing Chain? Other British Cars 20
steveg Steve Kingsbury has lost everything. Austin Healey 11
Got_All_4 TR2/3/3A Has anyone installed one of these slack limiting plates Triumph 4
Sarastro TR4/4A Camshaft oddity has me concerned Triumph 6
Got_All_4 General TR Has anyone used these poly bushings Triumph 6
5 For Everyone that has a BUGEYE OR FROGEYE Spridgets 3
M Overdrive has a mind of its own Austin Healey 21
Mickey Richaud Mod Note "Tinkerman" Has Passed Triumph 23
RAC68 Has anyone considered Power Rack and Pinion Stearing and/or an Air Bag suspension Austin Healey 32
K TR2/3/3A Moss Europe has restored the Jabbeke TR2 Triumph 0
PeterK TR4/4A From a VTR post on Facebook. Herman has passed. Triumph 16
Got_All_4 TR2/3/3A Has anyone tried this new steering box top plate Triumph 14
S TR2/3/3A Frustration has started but car wont. Triumph 4
Rut The Eagle has landed! Spridgets 19
KVH General Tech New Camshaft Has Rust Triumph 7
Jim_Gruber SUCCESS- VROOM, VROOM has been heard in Beavercreek, OH this evening Spridgets 31
BJ8Healeys This one really has me stumped! Spridgets 4
Editor_Reid Roy Jackson-Moore has passed Austin Healey 1
MisterB Engine spins, has OP, but......... Austin Healey 10
K TR2/3/3A Rebuilt steering has creative fix for NA worm bearing! Triumph 4
steveg Has anyone used a knock sensor? Austin Healey 0
NutmegCT So many cars! So much has changed! Other Cars 10
simon1966 Happy New Year. 463 BEV has a lot to look forward to. Austin Healey 5
TomMull TR2/3/3A Herald has a friend, TS58023 Triumph 5
S Has it really been 3 years? Spridgets 2
M TR2/3/3A Has anyone put in a Hi Torque Starter from Moss? Triumph 21
Got_All_4 TR2/3/3A Has anyone tried to rewind/fix a fuel tank sending unit? Triumph 11
S Hemmings has a Healey 3000 on the cover [and a Corvette] Austin Healey 5
T TR4/4A Question on re-torquing the head if it has leaked Triumph 18

Similar threads

Top