sparkydave
Jedi Knight
Offline
Hi all, it seems my wiper switch succumbed to the Prince of Darkness. Will have to see if Moss gets replacements back in, they are out at the moment. From my Googling I've figured out the low speed and high speed wires, but the diagram for the switch is very poor on how the parking wire figures in. I used a clip lead to energize the low and high speed wires and the wiper motor works with the switch unplugged. If I wanted to park them properly in the meantime, would I energize the parking wire, or jump that to the high or low, or ground it? I suppose I should measure it and see if there's voltage present on it with the switch unplugged; no voltage present might mean that energizing it will park the wipers.