• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR2/3/3A Wiring Harness Holders TR 3A

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
The body on my car has about 18 to 20 Metal tabs to hold the harness in place. They are about 3/8" X 2", they all had some sort of plastic tubing on them to prevent damage to the harness. What have any of you used to replace the original with.I know that I could rummage around the local hardware stores and find something but everything here is closed except Lowes and at 3:45 pm I'm not running off to Lowes. So any help you can give me would be appreciated. That way I would know what to look for.

Thanks, Tinkerman
 
I believe TRF sells reproduction tabs, and heat shrink tubing works well to cover them.
 
You could use clear tubing, Aquarium hose?
 
Do I vaguely recall that TR3s did not originally have that black tubing over the tabs?

Not that it isn't a good idea and certainly TR4s had them. I used the shrink tubing for mine.
 
The harness metal tabs on my car never had any plastic or other type of tubing covering them. I haven't owned the car from new, but it seems odd that someone would just remove everyone of them. Is it something they started to do in the later cars??

Edit: BTW, I never did cover those tabs with anything. Since I installed the Dan Masters Harness, I covered all of the wiring with that split, corrugated type covering.
 

Attachments

  • 19742.jpg
    19742.jpg
    28.6 KB · Views: 189
You could strip the exterior insulation from a heavy duty extension cord type wire or the same from 12/2 house wire.
 
I agree with Randall. On my 6 resto, I used heat shrink tubing.

Cheers,
M. Pied Lourd
 
Geo Hahn said:
Do I vaguely recall that TR3s did not originally have that black tubing over the tabs?
Click to expand...
None of mine have had it; but I've not owned them from new and I've never tried to research the subject. Seems kind of redundant, though, if the harness covering is in good shape. If the harness is moving in the tabs, there is something wrong.
 
Both TRF and British Wiring sell the smooth plastic tubing for wiring pigtails. It comes in a couple of sizes by the foot and is the same stuff that my TR had on the tabs. Just cut a length longer than the tab to cover the sharp edges of the metal tab when you fold it.
 
Back
Top