• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Will this work on MIG welds?

Share this page

T

tdskip

Yoda
Country flag
Offline
What do you think guys?

97055.gif
 
yes
 
I bought the electric version at HF but haven't used it yet. The replacement belts are expensive.
 
It'll probably work, but I think you'll be a slave to the sanding belts, and pneumatic tools generally have low torque. For grinding operations I generally go to my Dewalt DW400. If I have to get into a tight spot, then I'll rely on my pneumatic cut-off tool or die grinder. During my TR3 resto, the Dewalt was my most used grinding tool. It's fast and efficient at leveling those MIG welds and can be used in a variety of other jobs.
 
Hi Art - thanks for the post. I have a small grinder but have found I still can't get to all the areas like I want/need to.

Peter - did you buy this one?

92158.gif
 
I bought my first one on a trip to Germany. It was a Black and Decker, ran on 220 volts and was made in England. I've also seen them in Canada and USA. The one I have now is one I bought in Canada and is driven by my air compressor. I think Harbor Freight might have them. Much cheaper. Here I am in 1988 doing the rear clip under the rear valance with my Black & Decker electric driven unit.
 

Attachments

  • 19391.jpg
    19391.jpg
    64.8 KB · Views: 241
Every tool has a function, a place and time to use them. Anything that has abrasive qualities will grind M.I.G. welds. As stated before, Grinding large areas with the belt sander is Belt use intensive and cost prohibitive at best.
I prefer the disk type sanders For large areas and carborundum type disk grinders for high build up areas The belt type sanders come in handy for hard to reach areas and tight spaces where the larger sander/grinders won`t fit.
If you don`t have one, you will find a 1/4 angel grinder/sander with attachments {Both, carborundum and abrasive disk} quite useful and inexpensive to operate.
If a man is going to weld he can`t have too many sander/grinders of different sizes and shapes in his arsenal of tools.
I even use the drum sander attachment with my dremel tool at times.
For real tight places a burr cutter can be just the ticket!
Dremel has a nice assortment of these items
https://www.widgetsupply.com/page/WS/CTGY/dremel-burr-cutter
 
tdskip said:
Hi Art - thanks for the post. I have a small grinder but have found I still can't get to all the areas like I want/need to.

Peter - did you buy this one?

92158.gif
Click to expand...

Yep, that's the one. Came with an extra set of brushes for the motor. I've run it but haven't used it yet.
 
Thanks for all the input guys. I just bought this one and quickly ditched the family as we walked in the door and went and tried it.

As Kerry says "If a man is going to weld he can`t have too many sander/grinders of different sizes and shapes in his arsenal of tools"!

This is just the ticket for some areas I want to clean up but haven't been able to reach before.

Thanks guys - I'm chuffed.
 
Back
Top