Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
PeterK
Yoda
Offline
Here it is, my wife's new TR3A. Of course, she's only been able to drive it once since I have to make sure it's safe for her to drive more /ubbthreads/images/graemlins/wink.gif
So far we've found lots of litts bits missing. It is a Calif black plate car that had an amateur restore done and had quite a few extra parts left over that we didn't get.
Real happy with the condition of the body and chassis. Floors and trunk have a few small holes but minor, seats need new covers,etc. We put on Minilites and 205/60*15 Yokohamas that I had on my 4A project chassis. Has negative ground and electric fan, heater with fan, TR4 tranny with synchro. It was missing the fan shroud so I ordered one from VB and a yellow fan from TRF to fix the overheating. Engine is strong after I disassembled and cleaned the carbs, built a proper dizzy from my spares and did tune up. Runs cooler since the tune up too!
Projects for the winter are SS exhaust, Toyota 5-speed (already have the kit & tranny).
NEED PARTS if you have them email me please. We need 1) high note horn, 2) short shifter handle, 3) both heater hose bulkhead fittings.
So far we've found lots of litts bits missing. It is a Calif black plate car that had an amateur restore done and had quite a few extra parts left over that we didn't get.
Real happy with the condition of the body and chassis. Floors and trunk have a few small holes but minor, seats need new covers,etc. We put on Minilites and 205/60*15 Yokohamas that I had on my 4A project chassis. Has negative ground and electric fan, heater with fan, TR4 tranny with synchro. It was missing the fan shroud so I ordered one from VB and a yellow fan from TRF to fix the overheating. Engine is strong after I disassembled and cleaned the carbs, built a proper dizzy from my spares and did tune up. Runs cooler since the tune up too!
Projects for the winter are SS exhaust, Toyota 5-speed (already have the kit & tranny).
NEED PARTS if you have them email me please. We need 1) high note horn, 2) short shifter handle, 3) both heater hose bulkhead fittings.
