-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Which replacement top to get
- Thread starter Cyberpyr8
- Start date
Share this page
Geo Hahn
Yoda
Offline
I too live where most days are top-down days but when it rains (esp in the summer) it can be quite a downpour. I have an inexpensive Robbins top that should last forever since it spends most of its life in the boot. What helps is a wooden box I made to sit on the floor of the boot to put the top in.
This avoids the dilemma of either piling stuff on top of the top (not good) or having the top lay on top of the other stuff and risk scratches & other damage. I expect something similar could be done in a Spit boot.
The beige thing is a cloth bag I've put the top in.
This avoids the dilemma of either piling stuff on top of the top (not good) or having the top lay on top of the other stuff and risk scratches & other damage. I expect something similar could be done in a Spit boot.
The beige thing is a cloth bag I've put the top in.
YankeeTR
Luke Skywalker
Offline
Take a look at these...
Most vinyls that the manufacturers use are the same. The quality of the top is in the assembly.
https://aabestco.com/merchant.ihtml?pid=1146&lastcatid=1521&step=4
https://www.convertibletopguys.com/
Either one of these suppliers have had some good feedback here on the forum and there tops are less expensive, too.
Most vinyls that the manufacturers use are the same. The quality of the top is in the assembly.
https://aabestco.com/merchant.ihtml?pid=1146&lastcatid=1521&step=4
https://www.convertibletopguys.com/
Either one of these suppliers have had some good feedback here on the forum and there tops are less expensive, too.
tomshobby
Yoda
Offline
Vinyl is less expensive but I have found that it gets stiff when cold and is much more difficult to raise. I am not a fan of the shiny look of vinyl either, even though that is what I have. And I am not sure what I might eventually get for a replacement since it is rarely up anyway.
The problem of raising it when cold is probably more important for me because of the way a TR6 raises. When I had a TR4 it was not as big of a deal because of the way the top frame adjusts to tension the top after it is fastened all around.
The problem of raising it when cold is probably more important for me because of the way a TR6 raises. When I had a TR4 it was not as big of a deal because of the way the top frame adjusts to tension the top after it is fastened all around.
OP
Cyberpyr8
Senior Member
Offline
I ordered the Robbins top. The cold really doesn't affect me much down in Tampa. If it is too cold (60's or below...BRRRR!) I will have the top up before I leave the garage. Most days it starts off cold here and then warms up to the 70's. I will probably have the top down unless it is raining even on colder days.
When I had a Jeep Wrangler in MD I found the trick to putting the top up in cold weather was turning the heat on before you start. Pull the top up and the heat loosens it enough so that it will stretch. I once put my top down in 40* weather and was able to get the top back up by using the heater. I can only imagine that the Triumph top would work similarly.
When I had a Jeep Wrangler in MD I found the trick to putting the top up in cold weather was turning the heat on before you start. Pull the top up and the heat loosens it enough so that it will stretch. I once put my top down in 40* weather and was able to get the top back up by using the heater. I can only imagine that the Triumph top would work similarly.
Offline
Glad you went with Robbins! They're good quality for the dollar. Been using them for over twenty years on my own and clients' cars. Good fit and all hardware. Time was you could actually talk with the "boss" but now the son is in charge, they've moved to a new facility and are no longer a "cottage" industry. No change in the quality or fit, just less "warm-n-fuzzy" for acquiring the tops.
Send me a PM as to WHERE in Tampa! I'm over by the State Fairgrounds!
...and WELCOME to the absolute BEST forum onna 'net. Not just for LBC's but one of the most pro-active and friendly forum-style sites on th' planet.
REALLY. /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
Send me a PM as to WHERE in Tampa! I'm over by the State Fairgrounds!
...and WELCOME to the absolute BEST forum onna 'net. Not just for LBC's but one of the most pro-active and friendly forum-style sites on th' planet.
REALLY. /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
bcliff
Jedi Warrior
Offline
I got a top for a '63 Merc Comet from the convertibletopguys a few years ago. Quality was superb. I have put tops on MGs and Triumphs, and they are a breeze compared to a big top like the Comet had. The fit on the top was perfect, and installation was straight forward.
Bruce
Bruce
The secret to longevity on a vinyl top is in how you maintain it and how you stow it. Keep it clean, wash the windows with a mild detergent, and use Novus plastic polish on them. When you fold it up, make sure you do it properly. It's not a bad idea to put a soft cloth or towel between the window and the rest of the roof when folded.