• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

WHERE TO BUY A CLUTCH M/C PUSHROD?

Share this page

H

hkzimmer

Freshman Member
Country flag
Offline
I HAVE BEEN LOOKING FOR A VERY LONG TIME TO PURCHASE JUST THE PUSHROD ON THE CLUTCH MASTER CYLINDER. I OWN A '71 TR-6 AND HAVE REBUILT THE M/C AND IT WORKS FINE; THE PUSHROD HAS TOO MUCH PLAY FROM THE HOLE BEING ELONGATED ALL THESE YEARS OF USE. DOES ANYONE KNOW WHERE TO PURCHASE JUST THE PUSHROD?

THANK YOU FOR ANY HELP,

HANS
 
Try BPNW. I looked at their site the other day, and thought I saw it there. I know they do have the adjustable ones for the slave cylinder.

If all else fails head for a wrecking yard and get one off a Honda Accord, anywhere between 79-92 all use basically the same pushrod(which adjusts) which is a replacement for 6's.

I know I've put em in two different 6's.
 
Or drill it and bush it back to original size.....
 
heliguy said:
Or drill it and bush it back to original size.....
Click to expand...
The sides are a bit narrow for that, I had both the brake and clutch pushrod holes welded up and then re drilled. Just like new.
 
Use flanged bushings, plenty of room for that. I have tried the " weld up the hole and re-drill" before, and due to the softer metal of the welding rod, the holes seemed to elongate again quite fast......
 
Back
Top