Welch air filters

[bdcvg]

Well I jumped on the exchange rate and snagged some parts from Welch. One item was the ITG filter set-up. My question is for anybody that has this set-up, how did You address the crankcase ventilation hose?

 

[Bob_Spidell]

Not Welch, but when I installed K&N air cleaners on my BJ8 I installed a PCV valve.

 

[John Turney]

You can put a small K&N vent filter on the valve cover T in place of the hose that goes to the rear air filter. https://www.knfilters.com/vent.htm

 

[bob hughes]

I put a pair of rams or horns on my BJ7 and welded in a tube on the rear one to take the ventilation hose.



Bob

 

[Patrick67BJ8]

Well I jumped on the exchange rate and snagged some parts from Welch. One item was the ITG filter set-up. My question is for anybody that has this set-up, how did You address the crankcase ventilation hose?

I used a vent breather and you can find them usually in autoparts stores. Tom's Import Toys has them too. My ITG filter just barelt touched the underside of my hood/bonnet and I had to file it down a little. Be sure to get some of the ITG foam cleaner they sell and I you can get that here in the US.

 

[DerekJ]

I would install a catch tank. Feeding the crankcase vent into the carbs was a cheap fix for environmental issues but it also pollutes your air intake into the carbs.