• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Weight of chasis.

Share this page

J

John_Progess

Jedi Warrior
Country flag
Offline
Does anyone have the approximate weight of a bare chasis (no drive train, fenders, doors, hood, or trunk lid etc.) of a BJ8 or any 4 seater? Thanks and have a good day!

John
 
An article by David Seib comparing the Jule chassis with the original mentions that the original BJ8 frame weighed 135 lbs. The Jule frame weighed 215 pounds, but was much stiffer. The article was printed in April 2000 in the Healey Marque Magazine.
 
One hundred thirty five pounds (135 Lbs) seems awful light.

While I could handle this chassis to roll/flip it for painting, I have to think it weighed more than that.

Note, I was MUCH younger AND stronger then too!

Healey_Chassis.sized.jpg
 
The only parts covered in the article were the longitudinal and cross piece parts of the bare chassis, not all the superstructure shown in your photo. If that was what was meant, I have no idea.
 
TimK said:
The only parts covered in the article were the longitudinal and cross piece parts of the bare chassis, not all the superstructure shown in your photo. If that was what was meant, I have no idea.
Click to expand...
That makes me feel a lot better :wink:

If I had to guess the weight of something I lifted more than twenty (>20) years ago, I'd say the complete chassis (shown in my post above) was 350 Lbs.

I can't imagine the 4-seater being too much different.
 
Randy Forbes said:
TimK said:
The only parts covered in the article were the longitudinal and cross piece parts of the bare chassis, not all the superstructure shown in your photo. If that was what was meant, I have no idea.
Click to expand...
That makes me feel a lot better :wink:

If I had to guess the weight of something I lifted more than twenty (>20) years ago, I'd say the complete chassis (shown in my post above) was 350 Lbs.

I can't imagine the 4-seater being too much different.
Click to expand...

I would say that is a pretty accurate guess, I am sandblasting my (BT7)chassis right now and was figuring it weighed somewhere in the 350-450lb range, it is in the same state your pic is.
 
chassis1fs.jpg


<span style="font-size: 12pt"> <span style="font-family: 'Comic Sans MS'"> I'd say 135 lbs. is about right for this.

Two people can carry it very easily and one person can shift it about readily enough if a full lift isn't needed. I lifted one end onto the sawhorses and then the other, and it can be tilted on its side, etc. Adding the sills and main floors doesn't add much weight- maybe another 15-20 lbs. </span> </span>
 
Back
Top