• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Wanted: Early BN1 Sidescreens

Tech396

Senior Member
Country flag
Offline
I'm helping a friend who is looking for a pair of frameless side screens for the early BN1.
Here a photo as an example.
Any help is appreciated

1657499125204.png
 
Very Early BN1

BN1 met vol perspex sidescreens publicatie.jpg
 
I have a question. Of course this is only for BN1/2 cars. I modified a sidescreen set to replace the pliable plastic with the vinyl trim with a solid piece of lexan. I retained the chrome trim pieces but made no provision for a flap or a hole for reaching in to open the door (I may do but got lazy). My solution was to make a "key" out of a 1/8 metal rod that I can slip past the edge of the sidescreen to push on the inside door lever. Works well and I keep it in a secret place inside the rear fender well with a couple of magnets. Works great.....but how were you supposed to open the doors with those early solid side screens? Mine are certainly too well fitted to squeeze a hand in.
 

Attachments

  • 1731724527727_IMG_20240504_134412014_copy_1248x1664.jpg
    1731724527727_IMG_20240504_134412014_copy_1248x1664.jpg
    233.3 KB · Views: 14
Maybe the limited access was the reason they were not that common.
Because they are so rare I don't use them while driving
If the softtop is not too tight, you can pass it. With a hardtop that is a challenge ;-)
 
I have a question. Of course this is only for BN1/2 cars. I modified a sidescreen set to replace the pliable plastic with the vinyl trim with a solid piece of lexan. I retained the chrome trim pieces but made no provision for a flap or a hole for reaching in to open the door (I may do but got lazy). My solution was to make a "key" out of a 1/8 metal rod that I can slip past the edge of the sidescreen to push on the inside door lever. Works well and I keep it in a secret place inside the rear fender well with a couple of magnets. Works great.....but how were you supposed to open the doors with those early solid side screens? Mine are certainly too well fitted to squeeze a hand in.
Roscoe--

According to what I have read one gained access by unfastening the Tenax button closest to the door and reaching in.
 
Thanks Michael. I probably would have realized that if I had the soft top installed. I'll bet you can relate, I'm a hardtop guy now and if I could just figure out how to remove the hard top and stow it while driving it'd be a perfect world. Truthfully, I am thinking abut how I might do that without it ending up in the road.
 
In 50+ years in Healeys I've never seen side curtains like those. Are they some J.C. Whitney aftermarket thing? Maybe something cobbled together by a shade tree mechanic?

I see nothing salvageable there, but the ad states, "...in decent shape." I'd hate to see what that guy considers "poor condition."

By the way, Ken Fleming has a nice pair of the early style side curtains that I believe he'd part with. Find him in North Carolina in the club directory.
 
It's clear to me that these were probably made from a late model BN2 set of side screens and modified. The hole spacing where the screws are holding the plastic looks identical. One would have cut out the center horizontal stringer and welded up a small vertical piece where the openable window is attached to achieve this look. Close inspection of the welds on that piece certainly look " cobbled" to me. I agree, nothing to see here. Perhaps the door pegs and sockets are restorable. Not sure how the handle was supposed to work but at least it's ugly. I felt a tiny bit ashamed with how I modified my side screens but now, not so much.
 
Similar threads
Thread starter Title Forum Replies Date
CharlesBN1 Wanted wanted to buy - sidescreen trim/strips for early BN1 Austin Healey Classifieds 5
T TR2/3/3A Early TR2 Grille surround moulding wanted. Triumph 14
Twit early TR4 Crank Handle wanted Triumph Classifieds 0
rr64 Wanted Early MGB Inner Steering Track Rods Wanted MG Classifieds 1
PAUL161 MGB Wanted-Early MGB Banjo Rear MG 15
M Repair Shop Recommendations Wanted Austin Healey 0
BoyRacer Wanted Any year 3000 Block Wanted Austin Healey Classifieds 0
BoyRacer Wanted BJ8 engine block - Wanted Austin Healey Classifieds 5
T Wanted Wanted TR3 rust free nut & bolt restoration Triumph Classifieds 13
S Wanted *** wanted: front right frame section for 1967 BJ8 3000 *** Austin Healey Classifieds 8
F BJ8 Exhaust Hanger Pictures Wanted Austin Healey 12
CARSINC WANTED: 1275 Engine Spridgets 0
AngliaGT MGB-GT WANTED: Driver's Door Regulator + Two (2) interior handles. MG 1
D Wanted Wanted square body fuel pump Jaguar Classifieds 2
S Wanted Windscreen Wiper Arm for BN1 wanted Austin Healey Classifieds 2
5 Wanted Wanted 1966 mgb banjo type axle rear hub MG Classifieds 0
D Wanted Wanted: Chicklet Headrests for MGB/C! MG Classifieds 0
E Wanted 1963 Healey 300 mark 2 front grille wanted Austin Healey Classifieds 3
jehuie Wanted HS2 carburetor float chamber cover wanted Spridgets Classified 0
J BT7 Hardtop Crosspiece Wanted Austin Healey 5
Ranger68 Wanted 1969 MGB Sun Visor Wanted MG Classifieds 1
D Wanted TR6 72 Spoke Wire Wheels (painted) Wanted Triumph Classifieds 0
P Wanted Wanted: Healey 100-4 frame Austin Healey Classifieds 4
M Wanted WANTED: Hardtop (Factory) for BT7 Austin Healey Classifieds 6
prb51 Wanted Wanted...hardtop for 100-6 BN 6 2 seater Austin Healey Classifieds 2
K TR6 TR6 late rims wanted Triumph 0
B Stainless Steel Exhaust System Wanted Austin Healey 5
2 Wanted Wanted - TR4A parts engine Triumph Classifieds 2
Mickey Richaud Wanted Wanted: BJ8 Seat Track Sets (Both Sides) Austin Healey Classifieds 5
tj_tr3_tr6 Wanted Wanted / Need / TR4 Engine Block for 62 Tim from So California Triumph Classifieds 3
T Wanted Wanted : MGA rear deck cover MG Classifieds 0
M Wanted WANTED...New TR6 piston set. Triumph Classifieds 2
M TR6 WANTED....Nural pistons for TR6 Triumph 1
volunteer Wanted: Brake Master Cyl. Repair Kit for Daimler DS420 Other British Cars 18
M Wanted Wanted: Inoperative J Type OD Solenoid! Triumph Classifieds 2
T TR6 Opinions wanted Triumph 29
S Wanted: AH Concours Registry Guide Austin Healey 2
H Wanted Wanted TR6 Hardtop Triumph Classifieds 3
shadowfever MGB MGB intake wanted MG 2
D Wanted Wanted Triumph Classifieds 0
Joel Lester Wanted Wanted - TR6 steel wheels Triumph Classifieds 6
D Wanted Wanted 80Spitfire hard top and seats Triumph Classifieds 0
M MGA RHD rack and pinion wanted MG 19
T TR2/3/3A Wanted - Picture of TR3A original firewall layout Triumph 5
E Wanted wanted Austin healey 3000 adjustable steering wheel & dash pad Austin Healey Classifieds 2
J Wanted Help Wanted -SE WI Other British Classifieds 1
J Help Wanted - SE WI Racing 2
D Wanted: Austin Healey Classifieds 5
D Wanted: Austin Healey Classifieds 0
35 Siddeley MGB MGB Armstrong shock dimensions wanted MG 0

Similar threads

Back
Top