Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hello fellow enthusiasts!
This is a great place and I'm very glad that it is thriving. I've been perusing some of the posts this evening and have really learned quite alot already.
I recently purchased a '73 TR6 and, while it is in good condition - for the moment, I do realise that the clutch is needing some attention. At times, especially from a dead-stop, it is quite difficult to get into gear.
I'm also experiencing challenges getting the auto to start after it has been running for a while and the engine has heated up. A perfect example of this would be shutting down the engine and filling the tank with gasoline. Patience has been my virtue. I've found that depressing the accelerator pedal to the floor while cranking the engine has helped improved the re-starting time.
Anyway, just wanted to say "Hello" and share some of my "this weekend" project work with you all.
Best wishes and VROOM VROOM!!!
Daniel
This is a great place and I'm very glad that it is thriving. I've been perusing some of the posts this evening and have really learned quite alot already.
I recently purchased a '73 TR6 and, while it is in good condition - for the moment, I do realise that the clutch is needing some attention. At times, especially from a dead-stop, it is quite difficult to get into gear.
I'm also experiencing challenges getting the auto to start after it has been running for a while and the engine has heated up. A perfect example of this would be shutting down the engine and filling the tank with gasoline. Patience has been my virtue. I've found that depressing the accelerator pedal to the floor while cranking the engine has helped improved the re-starting time.
Anyway, just wanted to say "Hello" and share some of my "this weekend" project work with you all.
Best wishes and VROOM VROOM!!!
Daniel
