• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Vibration damper for 100/4

Share this page

wangdango

wangdango

Jedi Hopeful
Country flag
Offline
Hi, need some advice/input on fitting a vibration damper to our '56 100M race car. Couple of questions, I know Moss sells one, as does Dennis Welch and one is also available from SuperDamper. Questions are who makes one that has a pulley attached? Superdamper seems to have the best price but does it come with a pulley (have not called them yet, duh....). Advice?
Thanks
Ed
 
HI Call Bruce @ Healey Surgeons or David Knock at British Car Specialties and I am sure they can answer your question---Fwiw--Keoke
 
Ed -

I use a ProRace harmonic damper in their "Race" version. The schematics don't show it, but the belt pulley is built into the unit. Works very well not problems.
https://www.pro-race.com/austin.htm

Good luck with the race season.
 
Ed,
Looked into these a couple of years ago with a local manufacturer,
they were of the opinion that because my car is a four cylinder I would not gain much unless I were to be doing some serious revs
 
Back
Top