• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Vibration damper for 100/4

Share this page

wangdango

wangdango

Jedi Hopeful
Country flag
Offline
Hi, need some advice/input on fitting a vibration damper to our '56 100M race car. Couple of questions, I know Moss sells one, as does Dennis Welch and one is also available from SuperDamper. Questions are who makes one that has a pulley attached? Superdamper seems to have the best price but does it come with a pulley (have not called them yet, duh....). Advice?
Thanks
Ed
 
HI Call Bruce @ Healey Surgeons or David Knock at British Car Specialties and I am sure they can answer your question---Fwiw--Keoke
 
Ed -

I use a ProRace harmonic damper in their "Race" version. The schematics don't show it, but the belt pulley is built into the unit. Works very well not problems.
https://www.pro-race.com/austin.htm

Good luck with the race season.
 
Ed,
Looked into these a couple of years ago with a local manufacturer,
they were of the opinion that because my car is a four cylinder I would not gain much unless I were to be doing some serious revs
 
Back
Top